- Your Name – Aradhy Nikam, Shravee Katkamwar, Anushka Gupta, Atharva Pratap
- School – City Pride School Ravet
- Project Title / Topic – WeMoSat – Weather Monitoring Satellite
Brief Description of the Project
Weather plays a crucial role in agriculture, aviation, disaster management, and everyday life. Accurate monitoring of temperature, humidity, and altitude is essential for predicting weather patterns, studying climate change, and ensuring safety in remote or rural areas. Traditional weather stations are often expensive and not easily accessible to students or hobbyists.
To address this, we developed a low-cost weather monitoring satellite prototype using an ESP32 microcontroller, a DHT11 sensor (for temperature and humidity), and a BMP280 sensor (for pressure and altitude). This project demonstrates how IoT and embedded systems can be used to collect environmental data in real time. It is affordable, beginner-friendly, and scalable for advanced applications like cloud data logging or integration with mobile apps.
Objectives
-
To design and build a compact system that measures temperature, humidity, and altitude.
-
To transmit sensor data wirelessly using ESP32 Wi-Fi capability.
-
To create a simple monitoring solution that can be used in agriculture, education, and environmental studies.
-
To learn practical electronics, sensor interfacing, and IoT programming.
-
To explore how satellite-inspired systems can be built at a small scale for real-world applications.
Components Used
-
ESP32 (NodeMCU) – This is the microcontroller with built-in Wi-Fi. It acts as the brain of the system, processing signals from the sensors and transmitting data wirelessly. Approximate cost: ₹400–600.
-
DHT11 Sensor – This sensor measures temperature and humidity in the environment. It is simple to use and suitable for basic weather monitoring. Approximate cost: ₹100–150.
-
BMP280 Sensor – This sensor measures atmospheric pressure and calculates altitude. It is more accurate than older barometric sensors and helps in weather prediction. Approximate cost: ₹200–300.
-
Jumper Wires – These are used for making connections between the ESP32 and the sensors during prototyping. Approximate cost: ₹50.
-
Power Supply – The system can be powered using a USB cable, battery, or even solar power for outdoor applications. Approximate cost: ₹200–300.
Working Principle/Explanation
-
DHT11 Sensor: Detects ambient temperature and humidity using a thermistor and capacitive humidity sensor.
-
BMP280 Sensor: Measures atmospheric pressure and calculates altitude using the barometric formula.
-
ESP32: Collects sensor data, processes it, and can transmit it wirelessly to a mobile app or cloud platform (like ThingSpeak or Firebase).
Process Flow:
-
Sensors continuously measure environmental parameters.
-
ESP32 reads values via digital pins (DHT11) and I2C communication (BMP280).
-
Data is displayed on the serial monitor or sent to a cloud dashboard.
-
The system can be expanded to trigger alerts (e.g., extreme weather conditions).
Circuit Diagram Description
-
DHT11 Sensor:
-
VCC → 3.3V (ESP32)
-
GND → GND
-
OUT → Digital Pin (e.g., GPIO 4)
-
-
BMP280 Sensor (I2C mode):
-
VCC → 3.3V
-
GND → GND
-
SDA → GPIO 21
-
SCL → GPIO 22
-
-
ESP32: Acts as the central controller, powering sensors and handling data transmission.
Limitations & Future Improvements
-
Limitations:
-
DHT11 has limited accuracy compared to advanced sensors (±2°C, ±5% RH).
-
BMP280 altitude readings may vary due to weather fluctuations.
-
Prototype is ground-based, not an actual satellite.
-
-
Future Improvements:
-
Replace DHT11 with DHT22 or SHT31 for higher accuracy.
-
Add GPS module for precise location tracking.
-
Integrate solar panels for sustainable power.
-
Use LoRa or GSM modules for long-range communication.
-
Build a mobile app for real-time visualization of weather data.
Conclusion
The Weather Monitoring Satellite Prototype is a successful demonstration of how low-cost electronics can be used to sense and transmit environmental data. Using ESP32, DHT11, and BMP280, the system reliably measures temperature, humidity, and altitude. It is affordable, eco-friendly, and educational, making it ideal for students, hobbyists, and farmers.
This project not only enhances understanding of IoT and sensor technology but also shows how small-scale innovations can contribute to larger goals like climate monitoring and smart agriculture. With upgrades, it can evolve into a powerful real-world weather station.
I am proud to have built a project that connects science, technology, and sustainability!
